Grabo Pro Lifter- Electric Vacuum Suction Cup
Select Variation:
Description
Grabo Pro Lifter- Electric Vacuum Suction Cup
Features:
|
Battery |
14.8VDC 2600mAh Li-ion |
|---|---|
|
Rated Power |
16W |
|
Charger Input Voltage |
100-240VAC 50/60Hz |
|
Battery Charging Time |
~2hrs |
|
Non-Stop Running Time (Full Charge) |
1.5hrs |
|
Running Cycles (On Full Charge) |
900 ON-OFF cycles of 10 seconds |
|
Stand-by Mode (Charge Hold) |
30 days |
|
Pump Service Life |
100000+ ON-OFF cycles / 800+ hrs continuous |
|
Rated Air Flow |
0.7cfm (20 L/min) |
|
Maximum Vacuum Rate |
11.6Psi (0.8 Bar, 80 kPa) |
|
Maximum Lifting Capacity |
375Lbs (170 kg) |
|
L x W x H |
11.77 x 7.22 x 4.76” (300 x 184 x 121 mm) |
|
Net Weight (With Battery) |
3.2Lbs ( 1.5 kg ) |
|
Working Temperature |
32°F~140°F ( 0°~60 °C ) |
|
Applicable Surface Type |
Peak/valley heights less than 0.1” (3mm), |
|
Additional Features |
Pump stops automatically at maximum vacuum |
The GRABO Pro comes with a smart digital pressure sensor, digital display and smart settings for both weight and pressure.
GRABO Pro-Lifter comes as a complete unit, with pre-installed battery and vacuum seal.
That is not all. There are other accessories in the kit, including a multi-socket charger and a heavy duty carry bag. The complete kit is packaged in a functionally designed colorful box.
GRABO Pro is equipped with a strong vacuum pump. The foam rubber vacuum seal on the GRABO Pro Tool is robust and resistant to loss of vacuum pressure. Once the pressure pump is activated, it creates a strong suction and adheres firmly to any non-porous flat surface. The suction is strong enough to hold a load as heavy as 375 lbs. To lift any slab of flat solid material, simply turn on the unit and place it upright on the surface. GRABO Pro automatically monitors the vacuum and if the vacuum pressure is lost, the pump automatically runs until the vacuum pressure is restored.
Frequently Bought Together
Related Products
